DK Custom Products

Phone: 662.252.8828
Text: 662.420.4891
Email: [email protected]

Black Braided Fiber Hose EBS, Oil Filters, Oil Coolers

29.95
Availability: In stock
Item #: DK-BF-BH
Manufacturer: DK Custom Products

* Required Fields


29.95

 Black Fiber Braided Hose for External Breathers DK Custom Products Harley Davidson Premium Discrete Oil cooler Roadster  high flow M-8 milwaukee-eight softail twin cam dyna 72 48 Big twin evo nightster iron

BLACK FIBER BRAIDED HOSE

FOR EBS, Oil Coolers, Oil Filter Relo

Perfect for DK Custom Products 

Premium Discrete Breather System

Dual-Cool & Auxiliary Oil Cooler

Clean-n-Cool Oil Filter Relocation Kit

 

 

FEATURES & SPECS:

  • Black Fiber Braided Hose
  • Nitrile Rubber Fuel Line Inside
  • Fits Standard Banjo fitting for External Breathers on Harley's  (3/8" inside diameter)
  • Available in 2, 4, 6 & 8 foot lengths
  • Will withstand oil Temperatures up to 350* F
  • Compatible with Black Hose Finishers

 

The EPA has required Harley to route hot, dirty, oily crankcase air back into the air cleaner compromising the performance & longevity of your engine. When using an external breather system, your bike will run better and last longer, and with the Black Braided Hose it can look better.

The hose is available in 2, 4, 6 & 8 foot lengths so you can place your breather filter where ever you would like.

Automotive grade hose will withstand heat well beyond what your bike should ever experience.

Pictured is the hose with the Cool-n-Clean Oil Filter Relocation.  Also shown are the Black Hose Finishers.   This listing is for the Black Fiber Braided Hose only.

Important Note:  This hose is very tight fitting.  Soaking the end of the hose in hot water will soften the rubber up, making it a little easier to slide on to the fitting.  Using the black hose finishers is even a tighter fit.  They work, but require some patience to install.

 


"I prefer the Black Fiber Braided Hose to the Stainless Braided, not only for the look, but it does not scratch like the Stainless Braided Hose." -Slim

Customer Reviews

Quality
Value
Good looking and functional Review by J.
This is a way to dress up your ride and add function as well. Durable and a better option than the standard hose. (Posted on 9/4/2023)
Quality
Value
A touch of class Review by John C
I purchased this braided hose to go along with the external breather system and high flow air cleaner all purchased through DK. I opted for the braided hose just for the looks.it definitely adds a bit of class over the standard black rubber tubes.

You'll need some real good garage shears or a pair of strong tin snips to cut through the steel braid. Also, the instructions state that the hose is very stiff, they aven't kidding! Take the instructions advice and soak the tips of the tube that will be attached to the hardware in some hot water for 30 seconds or so. I did the typical dude thing and didn't read the instructions until after I fought with the tube for about 15 minutes and tore my fingers up on the steel braid! I boiled some water and put it in a coffee mug and soaked the tips for about 30 seconds and they slid right on.
(Posted on 7/31/2023)
Quality
Value
Nice looking hose to dress up your bike Review by Black Hose
Nice hose for my oil cooler and relocated oil filter. Price wasn't bad either. (Posted on 3/3/2022)


Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.