DK Custom Products

$5 Priority Shipping  Limited Time Only!
On Orders Over $100*
Phone: 662.252.8828
Text: 662.420.4891
Email: Support@DKCustomProducts.com

Battery Tender Harness - Jump Start Harness Combo

 25.95
Availability: In stock
Item #: DK-AG-MSHK
Manufacturer: Antigravity



Battery Tender Harness - Jump Start Harness Combo

JUMP START HARNESS

CAN DOUBLE AS A BATTERY TENDER HARNESS


Features:

  • Micro Start Harness
  • Adapter changes it into a battery tender harness*
  • Replaces Standard battery tender harness
  • No More battery clamps needed to jump start
  • Made to use with the Micro Start XP
  • Easy Install

This unit is specifically designed to work with the Personal Power Supply/Micro Start XP units.  

It is NOT Lithium battery specific, it can be used with Any Motorcycle battery to make jump starting as easy as plugging in your battery tender or charger.*

 

The MICRO-START Harness Kit was made so that you can easily jump start your bike using just the MICRO-START without the need for the  clamps, or removing the seat or side cover on your motorcycle.   It is a 12" (300mm) harness that connects directly to the battery while the other end can plug directly into the MICRO-START unit.   It adds convenience and saves time if the situation arises when you have to jump start your vehicle...Just connect the MICRO-START directly to this harness and jump-start your vehicle.  

Also included in the kit is an adapter that converts the Micro-Start Harness (BLUE CONNECTOR) down to an SAE Connector (Battery Tender type)  so you can easily hook up your battery charger and eliminate the standard SAE harness you might have.

A standard Battery Tender type Harness WILL NOT handle jump-starting... the wire gauge is much too thin and it will melt the wires.

*It has come to our attention that the protective diode in this harness does not work well with some battery tenders.  Some tenders do not register when the battery is fully charged and continue charging the battery.  If that is the case with your tender, you can either keep the standard tender harness connected AND connect this Jump Start Harness, or you can get one of our tenders that is compatible with this harness.

PLEASE NOTE: THE MICRO-START IS FOR JUMP-STARTING ONLY THROUGH THE JUMP START PORT!!!! NEVER LEAVE THE MICRO-START CONNECTED TO YOUR  VEHICLE'S BATTERY OR USE IN PLACE OF YOUR REGULAR BATTERY!!!  DO NOT TRY TO CHARGE THE MICRO-START DIRECTLY FROM YOUR BATTERY THROUGH THE JUMP START PORT. SEVERE DAMAGE CAN RESULT!

 

"This little device works great and is going on all my bikes to make charging and jump starting easy!"  - James

Be the first to review this product

No Reviews.


Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.