DK Custom Products

Phone: 662.252.8828
Text: 662.420.4891
Email: Support@DKCustomProducts.com

Chrome Hose Clamp Covers for Breather Hose Lines

9.95
Availability: In stock
Item #: DK-CHR-HC
Manufacturer: DK Custom Products



Chrome Hose Clamp Covers for Breather Hose Lines DK Custom Products Premium Discrete Magna Clamp Harley Davidson  M-8 Milwaukee-Eight Softail Twin Cam Dyna 72 48 Big Twin Evo Nightster Iron

CHROME HOSE CLAMP COVERS

FOR BREATHER HOSE LINES

 

Perfect for DK Custom Products 

Premium Discrete Breather System

 

 

FEATURES & SPECS:

  • Chrome Cover w/ Hose Clamp Built-In
  • .725" Maximum Outer Diameter
  • Fits Plain Rubber & SS Braided Hose on Premium Discrete Breathers  (3/8" inside diameter)
  • Sold in Pairs of Two
  • Gives a Finished Look to your External Breather System

 

The EPA has required Harley to route hot, dirty, oily crankcase air back into the air cleaner compromising the performance & longevity of your engine. When using an external breather system, your bike will run better and last longer, and with the Stainless Braided Hose & Chrome Hose Clamp Covers, it can look better.

Pictured below are a few views of the Chrome Hose Clamp Covers, the Chrome Hose Clamp Cover on a piece of SS Braided Hose, and a Premium Discrete Breather System with the Braided Hose and Chrome Covers installed on a bike.  This listing is for the Chrome Hose Clamp Covers only.

 


"The hose and chrome clamps are just what I needed  for my Premium Discrete Breather to match the chrome on my Deluxe.  Thank you!" -Beth

Customer Reviews

Quality
Value
Chrome Hose Clamp Review by John
I ordered these on two projects I did on my Triglide,Ketchikan, and my oil relocation filter. Both were easy to use and install and look good on both projects, would definitely use them again. (Posted on 7/6/2020)
Quality
Value
Look good Review by Marty
Product looks great, but I installed a catch can under stock air cleaner, and hose was too short to use. Will save for another project. (Posted on 6/8/2020)
Quality
Value
Chrome hose clamps Review by John
Very nice looking hose clamps that look great with the SS braided hose. Easy to use. (Posted on 5/19/2020)
Quality
Value
Braided hose and clamps Review by Blind al
I didn’t care for it after installation
Was difficult to install
Clamps stripped out and wouldn’t stay tight
I personally don’t recommend
But it looks good on it
I changed it back to original hose included in kit
Really lite the kit
Ordering a cooler soon
(Posted on 5/11/2020)
Quality
Value
Great looking clamps Review by Zeke
These work well with braided hose or regular hose, look much better than a normal clamp. (Posted on 8/6/2019)
Quality
Value
100% Review by Clyde
What more can I say than, I'm Happy (Posted on 6/17/2019)
Quality
Value
Hose fitting Review by Cecil
The hose with the braid was hard to get started in the hose clamp. when tight the outside shield was loose. (Posted on 3/15/2019)
Quality
Value
Complete package. Review by neilandyoli
One stop shopping for everything needed to add an external breather kit to your stage1 Harley. Plus other performance parts upgrades, and all top quality. (Posted on 12/27/2018)
Quality
Value
Really sets it off Review by Gray Biker
These covers look much better than a old cheap hose clamp. A good finish to the SS braided hose (Posted on 12/13/2018)


Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.