DK Custom Products

Phone: 662.252.8828
Text: 662.420.4891
Email: [email protected]

1.5" Handlebar Riser Extensions Harley-Davidson ...More Details

Availability: In stock
Item #: DK-15-RSRS
Manufacturer: DK Custom Products

Handlebar Riser Extensions Harley-Davidson Black Steel DK Custom Products Harley Davidson Raise Bars Dyna Softail Sportster Pull Back

 ONE PAIR of 1.5 inch




  Increase the Height of your Handlebars by 1.5 inches

~ Increase Comfort ~ Improved Look ~

MADE in The USA!


DK Custom Products



  • Durable Black Powder Coat Finish
  • Cold Rolled DOM Steel Risers
  • Includes Grade 8 Bolts 4" x 1/2" (other lengths available-see below)
  • FITS most Sportster, many Dyna and Softail Models
  • Made in The USA!


Raising your bars and tilting them back slightly can relieve the strain in your shoulders and back from the forward leaning position.

Whether you're wanting a taller look, needing more clearance, or wanting more comfort in the shoulders and back, these Stealth Riser Extensions are Easy & Economical!

These STEALTH RISER EXTENSIONS will raise your handlebars up an additional 1.5 Inches.

They are .890 in diameter, so they will fit most Sportsters & Many Dyna's and Softail's.

Simply measure the outside diameter of the riser below your handlebar clamp, if it is 7/8" (or a fraction larger) these will fit.

The Stealth Riser Extensions are also available in 1", 2", 2.5" and 3" heights.



The 1.5" Stealth Riser Extensions come with 4" long Grade 8 Bolts

NOTE: If you have a 2016-Up Roadster, it has zero rise risers and will need shorter bolts.  This is something you will need to get at your local hardware store.

Most stock bikes can be raised at least 1.5" without needing to replace cables, brake lines & wiring...HOWEVER some can go higher.  Check how much slack you have.

A small change can make a BIG Difference!!!

Customer Reviews

just what i needed Review by tex
did not feel much different, but my back and neck thank you very much, try it, makes a long ride painless. (Posted on 2/20/2023)
Good buy Review by Sixx
Good to know there’s options to raise bar heights. Installed drag bars but needed some height to compensate the loss of rise-great solution. Installed it on 2015 iron 883. Because of the blacked out look, you barely notice it between the tree and handlebar clamps, but you’ll visibly notice the look and your body will immediately notice the feel. Thanks DK!

Sixx (Posted on 11/10/2022)
Does what it says it does. Review by Joker71
Great product. I bought both 1" and these 1.5". Used the 1" first and seem to work fine. Haven't put these 1.5" on yet but, they are exactly the same, just .5" longer. If/when I try these, I may have to get a longer Brake line and maybe clutch cable though. (Posted on 9/7/2022)
Exactly what I was looking for! Review by Lee
Very satisfied with the product, and their customer service is excellent! (Posted on 5/27/2020)
Nice Extensions Review by Ty
Installed these on my 2018 Iron 883. Simple install and came with longer bolts. More comfortable riding position and did not require cable or wire extensions. (Posted on 5/18/2020)
Great product Review by Jimmy
Great product and a great price, makes the ergonomics of riding my roadster much better (Posted on 4/20/2020)
Works Review by Cal rider
Easy install nice paint. 2009 883L Sportster. (Posted on 4/15/2019)
1.5" Handlebar Riser Extensions-2009 Iron 883 Review by hero2zero
Installed this with Biltwell Keystone handlebars. Fit perfectly with no cable or brake line extensions necessary. As with most of DKC products, very good quality feel. Makes my bike comfortable. (Posted on 5/18/2018)
Perfect fit Review by Kirk
Simple install. I only had to adjust the brake line. 2017 Street Bob. (Posted on 5/9/2018)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.