DK Custom Products

IMPORTANT
SHIPPING NOTICE
CLICK HERE
Phone: 662.252.8828
Text: 662.420.4891
Email: Support@DKCustomProducts.com

3 Inch "Fat" Handlebar Riser Extensions

74.95
Availability: In stock
Item #: DK-3-SFT-RSRS
Manufacturer: DK Custom Products



DK Custom Handlebar Riser Extensions Fat Risers Harley Dyna Softail

 ONE PAIR of 3 inch "Fat"

STEALTH RISER EXTENSIONS

For

Harley-Davidson

  Increase the Height of your Handlebars by 3 inches

~ Increase Comfort ~ Improved Look ~

MADE in The USA!

by

DK Custom Products

 

FEATURES & SPECS:

  • Durable Black Powder Coat Finish
  • CNC Cut from 6061 Billet Aluminum 
  • Risers are 3" Tall and 1.5" in diameter
  • Includes Grade 8 Bolts 5.5" x 1/2" (other lengths available-see below)
  • FITS most Fat handlebar risers on Harley-Davidson's
  • Made in The USA!

 

Raising your bars and tilting them back slightly can relieve the strain in your shoulders and back from the forward leaning position.

Whether you're wanting a taller look, needing more clearance, or wanting more comfort in the shoulders and back, these Stealth Riser Extensions are Easy & Economical!

These STEALTH RISER EXTENSIONS will raise your handlebars up an additional 3 Inches.


They are 1.5 inches in diameter, they will fit "fat" risers found on many Softails and Dynas.


Simply measure the outside diameter of the riser below your handlebar clamp, if it is 1.25" - 1.5",  these will fit.

The Fat Stealth Riser Extensions are also available in 1" and 2" heights.

 

FITMENT NOTES:

The 3" Stealth Riser Extensions come with 5.5" long Grade 8 Bolts.

Most stock bikes can be raised at least 1.5" without needing to replace cables, brake lines & wiring...HOWEVER some can go higher.  Check how much slack you have.  Pictured is a 2016 Low Rider S with stock cables and wiring with 3" Fat Riser Extensions

 
A small change can make a BIG Difference!!!

Customer Reviews

Quality
Value
3" Fat Handlebar Risers Review by Ross
WOW... I LOVE these extensions. I recently bought a 16' Dyna Low Rider S. It was SUPER uncomfortable with the OEM bar height and riser. I had planned to buy new bars and risers, but... was not ready for that expense. I bought these 3" extensions just to get by until I was ready to make the BIG investment in bar-riser-cables. However, after install, I was amazed how comfortable the ride was with the new height and even with the factory drag bar. Cables/wires did not even need to be extended-replaced. I am so impressed, I have now decided that I don't need to change anything else!!! The fit, finish, quality is TOP NOTCH! Shipping was fast too! THANK YOU DK!!! You guys ROCK! Ross (Posted on 8/24/2021)
Quality
Value
Great product Review by Dyna Wide Glide
Quality made and fitment was great. Raised my bars on my 2015 Harley Wide Glide just enough. A lot cheaper than new bars and cables installed for around $1000.00! (3‚ÄĚrise was it for the stock cables) (Posted on 5/3/2021)
Quality
Value
Perfect Review by FXDLS
Perfect fit. Longer cables NOT NEEDED. 2016 FXDLS (Posted on 4/27/2021)
Quality
Value
Easy fast installation Review by Craig F
Easy fast installation more comfortable to ride bike looks good just enough length on brake cable plenty of room length on wires and clutch installed on 2015 fat bob thanks for another great product. (Posted on 11/3/2020)
Quality
Value
Just the ticket for my Street Bob Review by RedLee
Best way to add height to your bars without having to spend $350. Like a test ride for your bars. I love em and they added just enough grit to my bike. Thanks DK (Posted on 8/28/2020)
Quality
Value
Made my bars the perfect height Review by Sambo
Easy to install, on my 2000 fxdwg, put my bars at the perfect height. Bike feels much more agressive. (Posted on 3/23/2020)


Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.