DK Custom Products

IMPORTANT
SHIPPING NOTICE
CLICK HERE
Phone: 662.252.8828
Text: 662.420.4891
Email: Support@DKCustomProducts.com

4 Stage Machine Cut Billet Catch Can for External Breather System EBS Harley

64.95
Availability: In stock
Item #: DK-4ST-CC-MCF
Manufacturer: DK Custom Products

64.95

DK Custom 4 Stage Catch Can EBS External Breather System Harley Davidson Performance Air Cleaner

 

4 STAGE

VENTED ALUMINUM CATCH CAN

Perfect for DK Custom Products 

Discrete & Premium Discrete

External Breather Systems

Made in The USA!

 

 

FEATURES & SPECS:

  • CNC-Machined Aluminum
  • Vented Cap
  • 4 Stage Internal Filtration System
  • 1 Extra O-Ring
  • 1 1/2" Diameter 2 5/8" Tall
  • Hose barb for 3/8" ID hose (same as hose barbs on EBS)
  • Also available-Black Finish HERE
  • Made in the USA!

 

Hundreds of hours of research and thousands of miles of riding have resulted in this 4 Stage Catch-Can that allows air to pass through but keeps the oil and water in the Catch-Can on typical Harley's.  

See the photo's of the 8 different components that make up the 4 Stage System.  Even with the worst spitters most of the water and oil stays in the Catch-Can!

Designed for the hot, oily, watery, oxygen-depleted air to pass thru the tube, exiting near the bottom.

Most of the oil and water will drop into the low density foam.  The air, and some atomized water and oil hits the first separator, stopping some of the liquid, but allowing the air to continue on through the high density foam.  There are two more separators and two more pieces of high density foam that work at stopping the liquid, but let the air exit the vent holes in the cover.

Periodic emptying of the Catch-Can is easy.  Simply unscrew the can from the lid and dump it.

Cleaning of the foam and separators is not necessary, but easy to do if one wishes.

There is an extra O-Ring included, should the installed O-Ring get lost or damaged.

There is also a refresh kit with extra O-Rings and filtration system that is an option or can be purchased separately.

Sometimes the kits have two thinner pieces of low density foam (as pictured above) other times it is a single thicker piece of low density foam.  Both versions function equally well.

See that kit HERE.

 

The EPA has required Harley to route hot, dirty, oily, oxygen depleted crankcase air back into the air cleaner compromising the performance & longevity of your engine. When using an External Breather System, your bike will run better and last longer.

This Catch Can is a nice option that will work with your Discrete or Premium Discrete Breather System.

Also available in Powder Coat Black Finish, see at this LINK

These have a Machine Cut Billet Aluminum Finish that can be polished to a Mirror Finish.  See photos.

 Patent Pending



Customer Reviews

Quality
Value
Great Product Review by Jason D
Easy install, looks great, and most importantly it WORKS! My TC88 is a puker and this keeps the hot air and oil from making a mess in my air filter. My bike is running crisp and snappy. (Posted on 10/18/2021)
Quality
Value
Great product Review by Fabio
DK catch can is the best ever, It is perfect just as advertised and the service is over the top. (Posted on 9/15/2021)
Quality
Value
5 Stars!!! Fantastic Product Review by Rich W
Love my new Catch Can. It fit perfectly, and looks great; like it was custom made for my 2000 HD Fatboy. Wish I could attach a photo… it looks amazing! (Posted on 9/8/2021)
Quality
Value
Typically DK! Review by prariepilot
The products, in this case the EBS Catch Can, and service are typically DK - the best in the 'cycle parts business! I damaged the EBS Filter and decided to replace it with the catch can. A good choice, given my high-mileage riding. The filter was just too inconvenient to clean, then let dry. I bought a refresh kit along with the Catch Can, so there is no down time due to cleaning. Great product! (Posted on 8/18/2021)
Quality
Value
Catch can Review by Art
Catch can should have been polished or chromed I have one on my fxr and it was chromed. So this one being machine cut I routed it down to where it wouldn’t be seen. (Posted on 8/10/2021)
Quality
Value
Great service Review by TJ
Great service from DK, really helpful and made sure I didn’t make any mistakes with my order.
Turned up really quickly seeing as I’m in the UK and the quality was as good as it’s always been. (Posted on 8/4/2021)
Quality
Value
Sharp looks and great mod Review by Ricardo
I bought this as part of a intake complete system and installed it with hoses going up and coming back down just underneath the seat on my 2020 Deluxe. Looks great and I know it'll keep that dirty used air from re-entering my engine. Thank you DK Customs! (Posted on 7/28/2021)
Quality
Value
Finally! Review by Shane
I purchased DK's catch can after trying pod filters from Amazon and then another company's can. My bike spits a lot of oil out the breather bolts and DK's can worked perfect!
The other products I tried still leaked oil over my bike but with the design of the DK product I haven't lost a drop of oil on the bike. It contains it exceptionally and I am so pleased. I am in Canada and called to place my order. The customer service is second to none and I cannot stress enough at how pleased I am with the DK Customs and the product they make.
Do not waste your money on a lesser catch can. Buy the best! DK all the way!!! (Posted on 7/26/2021)
Quality
Value
Works as advertised Review by Herk
Works as advertised, very well made, (Posted on 7/21/2021)
Quality
Value
Nice look Review by Lucky
I got this to hang under my breather as pictued in other reviews. Definitely quality workmanship both inside and out. Super easy to access under the breather and the billet aluminum looks great. Here’s a tip: since this is bare billet aluminum taking 5 minutes to polish with some Mothers chrome polish will make it shine as well as protect it (Posted on 7/20/2021)
Quality
Value
Great product Review by Donny
Great looking can...works great and easy to install...love DK products...
Donny Lovette (Posted on 6/10/2021)
Quality
Value
awesome product Review by chad
Awesome quality catch can with a great price. (Posted on 5/26/2021)
Quality
Value
5 STARS!!! Review by Richard Siggers
This was the other part of a complete kit just like my review on the half of this kit was super super easy to do for a beginner wrencher I mean I didn't even own a screwdriver I had to buy cheap tool sets to do this work but I did it with no problems and it works great and looks awesome (Posted on 5/13/2021)
Quality
Value
Nice and Necessary addition Review by Big Red
I was browsing the site and came across this product. Being an old auto mechanic, I know the importance of fresh cool intake air for good power and efficient combustion. I had tried other external breathers in the past but this one looked well made and I like the fact that there are stages of separation of the oil and air. I am really pleased with this device and am glad I bought it. I am not sure that there is a significant power increase, but I know that I am now introducing only clean fresh cool air into my engine. Thanks! (Posted on 5/11/2021)
Quality
Value
Well made and compact Review by Jimbo
Easy install for the MOD on my 2015 Ultra (Posted on 5/8/2021)
Quality
Value
Great Product Review by Lyman
Just installed on my 2011 street glide no more oil dripping out of filter cover great product and a great price MADE IN THE USA Love it (Posted on 4/3/2021)
Quality
Value
Excellent product Review by Lawrence
My 2018 tri glide ultra has 69000 kms on it. I've purchased many products from DK Customs and this Catch Can is as expected, excellent quality and craftsmanship.

Thanks. (Posted on 3/20/2021)
Quality
Value
Best kit on the market Review by Nick R.
The entire system is posted on another review. This catch can set up looks stock, and is appealing. Very happy. (Posted on 2/24/2021)
Quality
Value
Well designed product and nice people. Review by Wezx
This is flat out the best designed motorcycle catch can currently available. It is designed so that oily vapor must go all the way to the bottom of the can by way of a tube and then the air vents by going back up through the filter layers and out of the top of the can. In other words the vapor has a long length of travel before venting which gives the greatest amount of oil filtering of that vapor before leaving the can. Most if not all other motorcycle catch cans have the inlet and vent outlet within very close proximity to each other which can allow the non-filtered vapor to leave through the vents as soon as it enters the can…not good and defeats the whole purpose. Dwayne and Lela were super great to work with, as mine is a custom install and I had certain tolerance and fitment concerns. There were a couple of small problems with my order and they were remedied quickly. Nice people and highly recommended!
(Posted on 2/23/2021)
Quality
Value
Quality product Review by Heavy D
Looks good no matter where you put it, does a great job of catching breather blow by. No mess to clean up just empty the can and go, (Posted on 2/17/2021)
Quality
Value
Well made Review by David
Love it, although depending on where you mount, can be difficult to disassemble. This may become easier with time.
(Posted on 1/28/2021)
Quality
Value
External blowby system Review by Ronnie
Excellent system to capture blowby from going back into carburetor & capture oil in catch can instead. High quality product from DK custom products. Thanks for great customer service. (Posted on 11/19/2020)
Quality
Value
Highly recommend Review by Wrench
Excellent choice over the EBS filter option. Catch can all the way! (Posted on 9/15/2020)
Quality
Value
Great Design Review by Mark
Another great product. Using with stock AC but this is really helpful keeping that hot oil / air out of the engine. I have cleaned it once after a 1000 miles and although not a ton of oil came out, enough to make me glad I have this product. I'm sure the engine appreciates it. :) (Posted on 9/14/2020)
Quality
Value
Very well made product Review by Dave
I called and ordered a custom unit for my bike. I already had some of the required pieces. They helped me with a custom kit. Excellent customer service wish more companies were as good as they are! A real pleasure doing business with them... (Posted on 9/1/2020)
Quality
Value
Great Products Review by Ian G
I bought this along with the premium external breather system and a Stealth air cleaner support bracket.

It was shipped to Scotland and arrived ahead of schedule.

Great service all round.

Thanks to all (Posted on 8/19/2020)
Quality
Value
well engineered Review by Ron
immediately felt increase in power and seemed to run cooler and everything that was said about the product seemed to be true. Highly recommended (Posted on 8/19/2020)
Quality
Value
Excellent Review by Limey UK
Really excellent customer care in these Covid times. Was Emailed after order and given options re delivery to UK. Item arrived and a top quality product!
American customer care at its best no hesitation about recommending this company & it’s products. (Posted on 8/8/2020)
Quality
Value
Blow by catch can Review by Bill
Quality work! I'm impressed with my entire experience. Yet to see the results, bike is still under construction. Everything I expected (Posted on 7/30/2020)
Quality
Value
Great product Review by Aussie Bob
Bought this to see how much blowby as my106 S&S stroker uses 1.5qts oil per 2500 miles.
Little blowby but will be great for the new pistons.and rings as only fuel and air will be going in.
I have bought other products from DK. They are great to deal with.
Highly recommend.
(Posted on 6/30/2020)
Quality
Value
Nice can! Review by Chad
A+ (Posted on 6/23/2020)
Quality
Value
Awesome Product Review by Lee
I like this containment can. I can help the EPA do a better job by disposing the billet can contents with my old oil that I take to the auto parts store for disposal. It makes more sense to use the breather can vs. running harmful waste back thru the engine. DK Custom Products has a lot of cool stuff to add to my bike over time. (Posted on 6/4/2020)
Quality
Value
Perfect! Review by Corey A.
The DK Custom 4 Stage can does exactly as claimed. It totally keeps that nasty oil off the bike. Perfect design! (Posted on 5/28/2020)
Quality
Value
4stage catch can Review by 03SportyBoy
Another DK awesome product. Tried other catch cans. They still "misted" oil all over my chrome. This 4stage catch can completely eliminated that. Best $50 I've spent towards my bike! (Posted on 5/28/2020)
Quality
Value
4 Stage Machine Cut Billet Catch Can for External Breather System EBS Harley Review by Fitz
This is a great product. Works as described. (Posted on 5/26/2020)
Quality
Value
4 Stage Machine Cut Billet Catch Can Review by John
Very nice machined catch can. I polished mine with a little bit of rubbing compound by hand, and they came out nice and chrome like. Excellent product. (Posted on 5/19/2020)
Quality
Value
looks great Review by Sean
Easy setup- looks great and is working well. Only reminder is wear gloves when installing it- cant wait to see what it looks like at first oil change. (Posted on 5/6/2020)
Quality
Value
Nice Catch Can Review by John
Ordered this and was shipped instantly. Nice little unit - easy to tuck away, nicely machined and seems to work fine. Thanks! (Posted on 4/23/2020)
Quality
Value
catch can Review by jim
after ordering the wrong thing you got me fixed up with what I needed. Thanks for your help. works great (Posted on 4/11/2020)
Quality
Value
Catch can Review by Frank
The filter i had let oil spray on my oil tank on my heritage. This filter keeps it clean. No more messes. It does the job well !! (Posted on 3/31/2020)
Quality
Value
Very Cool Review by Trent
Stopped the oil mist from the breather bolts with the DK catch can system.

Added some rubber O-rings into the grooves to give a nice look. (Posted on 1/16/2020)
Quality
Value
I like it Review by Blumule
Had a filter for years. Oil still dropped from breather and on bike. This is a nice little added touch. Looks cool too! (Posted on 9/17/2019)
Quality
Value
Oil smell Review by Alex
Even with all slobbering all over my saddlebags I never smelled it until I put this breather on . That being said the bike does run better idles smoother (Posted on 9/4/2019)
Quality
Value
GREAT Review by FIREMANVAN
Great improvement over the other ones you see on market. Works perfect, keeps that mist off the bike and in the can like it should. Thanks (Posted on 7/29/2019)
Quality
Value
Great little catch can Review by Leed
I already had my breathers plumbed to under the bike but it was getting really gunky. This catch can will keep the underside clean. (Posted on 6/3/2019)
Quality
Value
Looks great Review by Alan
Replaced my air cleaner on a 1998 Dyna Wideglide and decided not to vent the oil from the head breather bolts back into the engine. This catch can allows the oil to be captured and emptied occasionally when needed and it looks great! I purchased the cnc machined aluminum version. (Posted on 3/20/2019)
Quality
Value
great product Review by Cecil
was easy to install. shined up great on the buffer. looks great. (Posted on 3/15/2019)
Quality
Value
Excellent Review by LJ
As always, excellent quality part with functionality as expected. Always a pleasure to do business with DK Customs. Customer service is exemplary. (Posted on 3/9/2019)
Quality
Value
100% Good Review by Out to Lunch
Helpful , Top notch products , I'll happily return as the need a rises (Posted on 1/19/2019)
Quality
Value
Awesome product Review by C-Bass
Great product and awesome customer service/tech support. (Posted on 12/22/2018)
Quality
Value
Great quality Product Review by Syl
I have to wait until summer to test it
Live in canada (Québec) (Posted on 12/13/2018)


Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.