Customer Reviews

Quality
Value

Catch Can Review by Brett
DK was good to deal with. I’ve got it connected to a fueling dip stick on a 2020 Softail. I’ve thrashed it and the can works perfect. No more oil over my bike. (Posted on 12/30/2021)

Quality
Value

Awesome quality Review by Spike
I really like the quality of the catch can and how easy it is to clean. The black is a perfect match to my other accessories. (Posted on 12/29/2021)

Quality
Value

Very happy Review by SIR
I’m impressed with the quality, fit and finish of the catch can. Easy to clean and looks good. (Posted on 11/2/2021)

Quality
Value

Oil Catch Can Review by Carmelo
Simple but effective. Keep the oil out of your engine intake an your pants as well. Good quality material. Nothing like made in the US of A (Posted on 10/21/2021)

Quality
Value

Works as stated Review by 2015Free
This keeps oil off the side of bike with the EBS. Works great and is a quality product as is everything I have purchased from DK. (Posted on 10/18/2021)

Quality
Value

Quality product. Simple install. Review by Richard
While researching the addition of a catch can to my 2018 Street Glide Special, I spend a lot of time on YouTube seeing what other people had done to install this product. I ended up going with the installation of the catch can within the airbox but with the lines that would normally feed into the intake being connected to the catch can instead. The fumes that are generated will still be ingested into the engine however the oily mess that was present previously has been eliminated. So if you're concerned about keeping your motorcycle emissions legal, this setup will work for you as it did for me. (Posted on 10/15/2021)

Quality
Value

Great Catch Can Review by Ben Boyce
Very simple, effective product. The can works great. I just empty it whenever I wash the bike (about once every other week or so). I do recommend the catch can to anyone. (Posted on 10/12/2021)

Quality
Value

Happy Review by Chuck
I had purchased a outlaw Air cleaner a couple years ago and had the original catch can set up.
Well, things get improved from time to time and although irritated that refresh kits were not available for the original, I purchased the new design. Doesn't need to be cleaned as often.
The one issue I have is I get a little oil mist on my exhaust. More then likely because I have the can right below my air cleaner. ( I like that look) . Right after the install we did the 1000 mile in 24 hours Iron Butt and the rear cylinder exhaust got oil mist on it. ( not terrible) . Of course doing the Ironbutt in 16 hours would suggest that we ran these bikes pretty hard.
Last item. In the 2 plus years I've used this system, I have never had to return this bike. That's at least $500 in dyno time.
Good product. (Posted on 10/1/2021)

Quality
Value

So easy Review by Josh L
Finally got sick of wiping oil off the side of my bike. Found this website in a Google search and it seemed like the best option. So far so good! It was fairly easy to install, instructions were pretty good, and it’s working out perfectly so far. I love that the catch can is able to be emptied without disconnecting hoses. (Posted on 9/29/2021)

Quality
Value

Reluctant at first but now I'm sold on it. Review by Will
After watching videos and doing some research I decided to order the catch can. The material is solid and well built. I pulled my plugs and using a borascope, I check the piston tops. There was build up as there should be for 57K miles on my 16 Road King Police. I have the over sized breather bucket and had to be creative with the plumbing, but routed the hose down and using some zip ties (for now) mounted on the frame under the transmission. After rising for about 1K miles plus or minus, I once again checked the piston heads. They were a heck of a lot cleaner than before, and the bike is running smoother. I was actually surprised that something as simple as that could make that much difference. (Posted on 9/10/2021)

Quality
Value

Catch can Review by John Wayne
Love the look. Build quality is top notch. Only thing is I wish I would have bought the full kit. Thought I could save a little $ and get hoses and fittings elsewhere and it was a pain to track down what I wanted. (Posted on 9/4/2021)

Quality
Value

Excellent quality and would recommend to install on any Harley Review by RJ
I am very impressed with the quality of the catch can quality and finish. This was installed on my 2017 FLHXS and very easy to install. I would suggest to have the option to have 1/4 inch ID. (Posted on 8/23/2021)

Quality
Value

Black catch can built n constructed very good Review by Keoni
This catch can is quality material!!!!
Maybe n future have a 1/4 “ id as option.. I recommend this item or breather system for all Harley’s from D K (Posted on 8/20/2021)

Quality
Value

Catch can Review by Pete
Very impressed with the quality of the cam finish is great to bad I had to hide it.I used a system I found on YouTube and you cant see a thing great product .cant wate to see how it is working. (Posted on 8/13/2021)

Quality
Value

High quality - easy install Review by Sarge
I ordered the aluminum kit online. Then I found that the black can was available. The next day I called and spoke with a very pleasant and helpful young lady. She intercepted my order before if was shipped and swapped out the can for me, saving me the hassle of returning and reordering the correct part. The catch can was of high quality and the install was easy. I spent a very enjoyable afternoon working on my Road King. (Posted on 7/22/2021)

Quality
Value

Catch can Review by Shabang
Great product no more oil drip (Posted on 7/12/2021)

Quality
Value

Eliminates Intake Debris Review by David792
I installed the catch can, replaced my air cleaner and rode 800 miles in two days. After the ride I checked the catch can and saw all the impurities that would have gummed up my filter or went straight into the intake. Amazing results. Highly recommended. (Posted on 7/7/2021)

Quality
Value

Perfect Review by B.johnson
Great product, well packaged. Very easy install. The finish on black on the can is awesome and blows the filter out of the water and is very well made. (Posted on 6/23/2021)

Quality
Value

Very good quality Review by Artorius
Do NOT be tempted by one of the lookalike cheaper and slightly smaller catch cans that are plentiful online - they don't work and you will get a lot of oily gunge coming out of the breather holes all over you or your bike on longer rides. They only have a bit of foam inside which is useless. The DK one has worked perfectly due to the internals. Well worth a bit more money. (Posted on 6/3/2021)

Quality
Value

Works Well Review by Dom
I purchased 2 of theses one for my Softail and one for my Sportster, both were easy to install and work good. (Posted on 5/20/2021)

Quality
Value

Catch can Review by Mick
Top quality! Fit & finish above par! Used on 2014 FLHTCU. (Posted on 5/19/2021)

Quality
Value

Great product Review by Steve
Fast delivery to Australia and a great product well made looks and works great (Posted on 5/6/2021)

Quality
Value

DK Black Catch Can Review by eforman48
High quality product that was easy to install. Works as advertised. Thank you. (Posted on 5/6/2021)

Quality
Value

Catch can Review by Shrock
Awesome looking catch can well made
Will go on every bike I own. DK is good stuff !! (Posted on 4/22/2021)

Quality
Value

Excellent product! Review by HogWart
I thought this to be a bit pricey for what it is, but after I received it, I can see why. It is very well made, well engineered, and looks very nice! So nice, I considered hanging it in plain sight (but in the end, I put it underneath the motorcycle). It looks very easy to service - just unscrew the body, and clean it out. Another very nice product from DK. (Posted on 4/22/2021)

Quality
Value

Good quality, works well Review by Gordy
The catch can is made extremely well, looks good and works well. I've installed it on two bikes now, very satisfied. Staff are helpful and courteous, delivery is fast. (Posted on 4/5/2021)

Quality
Value

Great product Review by Pa cowboy
Easy to install, works and looks good. Nice
black finish that blends in with the engine and hoses. (Posted on 3/29/2021)

Quality
Value

Great service Review by SYKES HD
Great looking, works well, quick delivery to the UK (Posted on 3/22/2021)

Quality
Value

Would Highly Recommend Review by Doug E
Easy install does exactly what it is advertised to do, Looks custom with high quality in mind. (Posted on 3/21/2021)

Quality
Value

Black catch can Review by Pearljohn59@yahoo.com
Awesome well made precise product, very happy camper! Thx (Posted on 3/18/2021)

Quality
Value

Very nice catch can Review by Greg R
Best mod I’ve done on my bike. Looks real nice when installed. After two weeks I unscrewed it to check and there was nasty brownish oily water there that would have otherwise been ingested by the engine. Keeping the junk that enters the engine to a minimum is really helpful when trying to get high reliable mileage on any bike. (Posted on 2/1/2021)

Quality
Value

Nice product Review by Prez
Very nice product (Posted on 2/1/2021)

Quality
Value

Quality product Review by Rosco
Well made and simple to install. (Posted on 1/28/2021)

Quality
Value

Perfection Review by Link
Exactly what I was hoping for and couldn’t be happier. Looks great on the bike. (Posted on 1/26/2021)

Quality
Value

4 stage Catch Can Review by DF
A well made quality product that's easy to install. In addition the entire staff at DKCP is friendly, knowledgeable and extremely helpful. I would recommend this product and company to anyone. (Posted on 1/9/2021)

Quality
Value

Quality made product Review by Windsurfed
Quality made product. CNC machine. Made in the USA. (Posted on 1/8/2021)

Quality
Value

First catch can and it's perfect. Review by dalsan82
Well made and reliable product.
I installed below air cleaner, It also looks good.
(Posted on 12/22/2020)

Quality
Value

4 Stage Black Catch Can Review by Harley Dude
Always been a fan of catch cans, relieved to find this product that includes all the hardware necessary to attach to your bike. Plan on emptying the can on each oil change. It is comforting to know only clean cool air entering the engine AND your air filter will stay cleaner much longer. (Posted on 10/27/2020)

Quality
Value

4 Stage Black Catch Can for External Breather System Review by Phil
Catch can works as advertised. The blachkblends in with the bike and is not even noticeable.
(Posted on 9/21/2020)

Quality
Value

Nipple Review by Dean
Make the nipple the same size as the small hose to get rid of the ugly adapter hose


********************************
We wish we could do that. Over 75% of the folks using the Catch-Can use larger hose that fits the Catch-Can nipple.

DK Support Team (Posted on 9/17/2020)

Quality
Value

4 stage catch can Review by Double R
excellent product. well made and works as described on my 2008 flhtc. would recommend to anyone who feels the need to stop carbon build up....which should be anyone who plans to keep their ride for the long haul......Thanks DK

(Posted on 9/8/2020)

Quality
Value

High quality Review by Manchild
As with all of DKs' products that I have used so far, this one is top botch. I got this for my '17 Slim S SE 110. No more oil mixed air going into my intake and motor. By redirecting the PCV from the intake to this can I have seen a noticeable bump in performance as stated. (7% power increase claim) The bike feels it has more torque and the rpms seem to climb faster. Could it be placebo??? sure. But there is no denying that OIL MIXED air is no longer going into my motor. AND THAT alone makes this mod worth doing. Imo. KEEP YOUR MOTOR CLEAN. Stop the carbon build up that is happening by not venting the PCV to a can or atmosphere via filter. GREAT MOD. Thanks again DK (Posted on 8/27/2020)

Quality
Value

Great Quality Review by JC
The catch can is made with high Quality in mind and blends extremely well with the looks of the bike. I can even feel a difference in performance when accelerating. I don't have oil spitting down the motor and crossover pipe any longer. I am very happy with the results and will recommend to everyone! (Posted on 8/16/2020)

Quality
Value

Looks to be well made. Review by Bill
Picked the black can to hide under floorboard. After 300 miles I opened it up. Sure enough there was breather oil in the can and not on the air filter. Used JB Weld to plug holes in backer plate. Working great. (Posted on 8/6/2020)

Quality
Value

Catch can Review by Doug
Nice product, works as explained, love it. Thanks! (Posted on 8/6/2020)

Quality
Value

well made but too small... Review by Rusty
In my opinion it is a well made unit... however, the capacity is too small, requiring cleaning too frequently.

*************
If you are filling up/needing to clean it more than once every 3000-5000 miles you are spitting too much oil.

The video at the following link may help you get it down to a "normal" amount.

https://www.youtube.com/watch?v=gJ0vYAitUqU


DK Support Team (Posted on 7/16/2020)

Quality
Value

quality product Review by Ironman Chris
Works as expected.High quality construction. The ribs around the bowl act to slow down the oil film from forming droplets at the bottom. You can see when it needs cleaning before that happens.It serves as a "time to clean" indicator,great idea. (Posted on 6/8/2020)

Quality
Value

Great Review by Evel
Very high quality! (Posted on 5/6/2020)

Quality
Value

Would do it again Review by GDish
Very nice product. Quality machine work, But finish not that tough. I really couldn't believe that I could feel a difference how the bike ran. Big Question would I buy this again. YES (Posted on 4/30/2020)

Quality
Value

Catch can Review by Dw
Great product, does what it says it does. Good finish on it, don’t mind having it standout on the side of the bike, not some ugly piece I had to tuck away under the bike (Posted on 11/5/2019)

Quality
Value

Nice Product Review by C
Got the catch can to replace the exposed filter on my external breather which was letting some oil make contact with the heads and creating a burnt oil smell.

Installation was simple and its barely noticeable located behind the horn cover. Hopefully this stops the smell and I continue to enjoy the performance bump with this style breather vs the HD routing back into intake style but with no mess. :) (Posted on 10/25/2019)

Quality
Value

Perfect Review by Joe T.
Use with J&P external crossover and about 3" of fuel line. Attached with black tywraps. Looks great and works better. No spray or leaks. Much better quality and pricing than others on the market. Highly recommend. (Posted on 10/1/2019)

Quality
Value

good quality Review by joglock
The quality of the item is good and keep the primary cover nice and clean. (Posted on 9/25/2019)

Quality
Value

Really works Review by Harry
I've used another brand before, but still got a little messy. This one works perfect. Great product, my brother and dad are both plan to get this style for their bikes too now. (Posted on 8/24/2019)

Quality
Value

Great looking product !! Review by Grumpy
Have to love that CNC, they do great work. This a smart looking, well built and functional product. Some delay in receiving goods due to USA weather but communication on this was great. Pity the weak AUD makes purchases and freight to Australia dear. keep up the good work, thanks (Posted on 8/10/2019)

Quality
Value

DK 4 Stage Catch Can Review by T11Spanner
I originally had the small catch can on my '17 M8 Ultra. I went with this one and no longer have oil on the pipes, saddle bag, seat and my pants. Easy install, works like a charm! (Posted on 7/16/2019)

Quality
Value

Good quality! Review by Travis
This catch can has been great. No more oil on my bike or jeans. This is super easy to install and has been one of the best investments for my bike. Its super easy to unscrew and dump out and I will definitely do the breather kit with the catch can on any future bikes. (Posted on 6/4/2019)

Quality
Value

Extremely Well Made Review by Wes
A very well made item and will be a very easy installation. Should also be extremely easy to service and maintain. (Posted on 5/4/2019)

Quality
Value

DK catch can. Review by Yob
Great stuff, works well great price. Shipping was quick. (Posted on 4/23/2019)

Quality
Value

Great job Review by Golfblues
I had the old style can which was smaller. This can holds a lot more and does not mist on the right side of my bike. The internals are much better than anything else on the market to keep the oil in the can. Great job by DK (Posted on 4/23/2019)

Quality
Value

Catch can on 71 FLH Review by hscic
Installed this on my crankcase breather hose off my oil pump on a 1971 FLH Shovelhead. A little large but excellent quality nonetheless. (Posted on 4/9/2019)

Quality
Value

Works great Review by Rich
This catch works great. Nothing but water leaves the can. No oily mess. All of the misty oil stays in the can. Great product. DK customs rocks (Posted on 2/10/2019)