DK Custom Products

Phone: 662.252.8828
Text: 662.420.4891
Email: [email protected]

Installation

  1. How to Install DK Coil & Ignition Relocation Kit on Sportster without Tank Lift

    How to Install DK Coil & Ignition Relocation Kit on Sportster without Tank Lift

    Harley Davidson mounts the ignition coil and key switch along the frame rail beneath the gas tank, right at the front of the bike. Although functional, some owners prefer to open this area up by moving the coil between the cylinder heads.
  2. DIY External Breather System

    DIY External Breather System

    The EPA has required Harley to route hot, dirty, oily crankcase air back into the air cleaner compromising the performance of your engine. This vents it without compromising the performance and longevity of your motor.
  3. Installation of External breather system on Stock Twin Cam Air cleaner

    Installation of External breather system on Stock Twin Cam Air cleaner

    If your air cleaner system will accept the Stock OEM breather bolts, then this breather kit will allow you to route the hot oily air to the supplied filter that you can place anywhere you like. Will also work with any air cleaner system that has breather bolts with a nipple on the end to accept the supplied hose.