Black Motorcycle Horn 105 dB w/ Wire extension & Bracket
NEW BLACK HORN
105 dB
Universal Motorcycle Fit
FEATURES & SPECS:
- 105 Decibel Rating
- Includes Wire Extension Kit
- Black
- E-Z BOLT-ON INSTALL- Universal Fit
- Includes hardware to mount on Harley Downtubes***
- Measures 2.75" in diameter
Bolts right between the downtubes in front of the front cylinder.
It is a little louder & higher pitch than a new Sportster horn.
Comes with horn wire extension and mounting hardware.
***If you have a "Cowbell" horn on the side of the engine on your bike, including but not limited to a Sportster Custom, 72 or Roadster, you will need an additional "Horn Relocation Bracket" to mount this horn. Click HERE to see the Bracket
This is an EASY install - 5-10 minutes!
4.9
Write a review
Share your thoughts with other customers
Top customer reviews
-
Relocating or motorcycle horn 0 people found this helpfulI purchased a relocation to center my coil on the side of my motorcycle engine area relocating the horn in front down to the neck. It was not a problem very simple, easy project had all the parts pieces I needed with the gift.
-
Looks great 0 people found this helpfulEasy install and the extension wire were just right. Louder than expected
-
Works as advertised 4 people found this helpfulEasy relocation to under the fork. I had to open the mounting hole a little bit to fit the fastener that was installed. Wired up cleanly. Horn is loud and strong.
-
Same function as stock with a cleaner look. 1 people found this helpfulMuch cleaner look with horn under the seat and I used this kit with DK coil relocation. I mean who uses a horn on a Harley anyway though.
-
Good Product 1 people found this helpfulHad a horn on my 12 Trike break during recent trip. This is the perfect replacement. Used one a couple of years back on my wife’s bike. Still quality, plug & play, and great value. Plus got rid of the lame cowbell.
-
Well thought out, plug and play. 0 people found this helpfulI was never crazy about the big cowbell horn hanging between the cylinders. I decided to put it under the seat where I didn't have to look at it. Everything needed was included making it simple.
-
Great kit 0 people found this helpfulEasy to install, perfect fit. I have the two inch tank lift kit. This made it easier to lift up the rear of the tank so I could tuck the wires into the tray under the tank. Horn is loud but sound is a bit high pitched, would be perfect if the frequency was lower.
-
Easy 0 people found this helpfulEasy install, of course I already had the bike stripped for another project just seriously took me 5 minutes. Great product!
-
Easy install 0 people found this helpfulInstalled this on my 16 Dyna. Great horn relocation kit. I have a crash bar up front, and even with that I was able to mount it to the frame, with the help of a few zip ties. Not as deep of a tone as the OEM horn but, for the size and convenience, it's a win.
-
Exactly what I needed 0 people found this helpfulI have a 2013 sportster 72, and I needed this part to relocate my horn after doing all of the other typical relocation stuff and wire tuck. Great quality and a good price.
-
Just what I needed 0 people found this helpfulI was doing the whole relocation deal with the wire tuck, just like everyone else. But needed to figure out how to relocate my horn. And this was exactly what I needed. It was quick and easy and the parts are great quality at a good price as well.
-
This works! 0 people found this helpfulInstalled on 2011 fatboy lo. You can do this in 15 min. Extension wiring makes it simple to relocate in multiple places, down tube seem to work best and is hardly noticeable. Good loudness, better than stock.
-
Thin and easily hidden 0 people found this helpfulThis is definitely thinner and easier to hide than the stock horn would have been. It's decently loud
-
Nice 0 people found this helpfulIf ur looking to get rid of that cow bell and relocate the horn to the front this is the kit to have along with the coil relocation kit, I installed both on my 2010 dyna wide glide and couldn’t be more happier!
-
Easy install 0 people found this helpful2017 Slim S. I did this with a coil relocation kit. Wiring supplied is high quality. Install was super easy. Just be sure to use Blue/green loc tite. The horn sound is like the Roadrunner when you push twice really fast. lol Its all good. I hardly use my horn anyway. This horn is very loud. No more cow bell.
-
Easy Install 0 people found this helpfulGreat kit...super easy install... Ordered mine as an add-on to the coil relocation kit (with the Harley wires) for an '04 FXDXI. I mounted the new horn on the backside of the original coil location's bottom hole using a spare bolt I had (1/4"-20). All included wiring was well made, with plenty of length to do both relocations. 15 minute install...
-
Good product 0 people found this helpfulSuper easy install, much slimmer than the stock Harley horn. Easily tucks in under seat. Will need to make center mounting hole larger to bolt to front downtubes with crash bar.
-
love this, looks great 0 people found this helpfulQuick, simple . Down with the cowbell.
-
Good horn 0 people found this helpfulWorks well. Routed the horn behind the battery box on the right side & grounded it under the seat instead of mounting it on the downtube. Loud & now discretely tucked away. I’d recommend to anyone looking to replace the stock cowbell.
-
Ok horn kit 2 people found this helpfulI am not happy with this horn kit. It is simple to install but I don't like the fact that it is made in China and my bike now sounds like a rice burner. This will be coming off of bike once I find a horn made in USA and sounds like a horn. I have taken on the daunting task of removing and replacing all the made in China cr** off my bike.
-
Easy Easy and Horny like a horn should be! 0 people found this helpfulPlug and play. The only thing I dont care for is the tone a lil Jap bike sounding... not bad though. Louder than stock and came with everything needed to move from the original location to the front of the frame under the neck.
-
Horn relocation kit 0 people found this helpfulAwesome, absolutely simple to install.. Great product, wiring harness made it plug and play..
-
Great 0 people found this helpfulPackaged well. Everything well made. Easy install. Cleaned up the side of my Road King. Looks great
-
Perfect fit 0 people found this helpfulNot really much to say, but plug and play.
-
Quality 0 people found this helpfulI installed the horn relocation kit after my coil relocation was done. I like the horn kit but the sound was that of a Honda rebel so I modified the provided bracket and used my OEM horn instead.
-
Great product 0 people found this helpfulOnce again DK does a great job, if they have it in stock, i will always buy it from them, i bought the horn, pre fabed red ignition wires, and the coil relocation kit, i then bought a set of 2 inch premeir tank lift kit. Fantastic, they now have a new style tank lift, if i didnt just buy the old style i would have loved to had the new style, missed it by a couple weeks, but the old style are very nice, thanks again Sean
-
Good product 0 people found this helpfulGreat company an customer service
Write Your Own Review
