- Home /
- Bolt-On Solo Seat System w/ RUBBER Bumpers - 2004-Up Sportsters
BOLT-ON
SOLO SEAT SYSTEM w/ RUBBER BUMPERS
For
2004 - Up SPORTSTERS
SUPER-LOW Solo Seat Suspension
MADE IN THE USA!
By
DK Custom Products
FEATURES & SPECS:
- Direct Bolt-On, no drilling, cutting or welding
- Includes Your Choice of a Bobber or Chopper Style Seat Pan
- Includes Front and Rear Mounting brackets that bolt onto your Sportster
- Includes Pair of Rubber Bumpers
- Includes All Needed Hardware
- Easy Install- Takes less than 30 minutes
- Step-by-Step Instructions included
- All Made in The USA!
- Optional Adjustable Adapter
- Optional Frame Cover
- Optional ECM Fender Cover (2007-2009 Models)
- Optional Leather Seat Cover Kit
Check out the short video below for just a few ideas on how the
DK Custom Solo Seat could look on Your Ride!
..
The Outlaw Sportster Solo Seat w/ System Rubber Bumpers gives the Lowest Profile Suspension in the Solo Seat Experience for 2004 & up Sportys.
There is NO drilling, cutting or welding needed. Simply bolt on the included Black Powder Coated brackets to existing mounting points on your Sportster and attach the rubber bumpers and seat to them.
This is an E-Z install. Takes less than 30 minutes. (it does NOT require un-bolting the rear fender like other kits do)
You have a choice of a Bobber or Chopper Style Seat Pan. Both are pictured above. The Chopper Style is 14.25" front to back, and it is 10.5" wide at the widest point. The Bobber Style is 13" front to back, and is 12" wide at the widest point. Both have a great rear roll to keep you in the seat and off the fender.
Run it with a seat cover, or don't cover it at all. (Optional leather seat cover kits available HERE)
1" Rubber Bumpers that can be trimed for an even lower profile- For details, Click HERE For detailed information on all Spring Options, Click HERE.
The front part of the included hinge, where it bolts onto the frame, can easily be modified if you want it to sit even lower.
With the Optional Adjustable Adapter you gain 2 inches of movement of the seat forward or rearward. This allows you to dial in the ideal seating position in relationship to the grips and footpegs.
Optional Frame Cover that fits below the seat pan and over the Electrics. (click HERE for full details)
Optional ECM Fender Cover for 2007-2009 Sportsters (click HERE for full details)
This is a direct bolt-on for 04-Up Sportsters, and w/ minor fab work can fit earlier year model Sportsters AND a variety of other motorcycles.
~Lowest Profile in Suspended Solo Seats for a Sportster ~
"Way better than a rigid mount seat. I was surprised how much the rubber bumpers absorbed the road. DK Custom Rocks!" -Spider
Product Tags
Use spaces to separate tags. Use single quotes (') for phrases.
- Accessories
- Scratch & Dent Specials
- Air Cleaner - Intake
- Apparel - Gear - Jewelry
- Coil & Key Relocation
- EFI Tuners
- Electrical
- Engine Upgrades
- Exhaust
- Footpegs
- Frame/Suspension
- GIFTS
- Gas Tank Lift Kits
- Lubrication
- Special Packages
- Stage I Kits
- Tour-Pak Kits
- NEW PRODUCTS
- Reports
- BEST SELLERS
- FAQ
- Sportster Parts
- Dyna Parts
- Softail Parts
- Bagger Parts
- Trike Parts
- Home Reviews
- Murdered-Out Mods
- Winter Project Ideas
- M8 Softail Parts