DK Custom Products

Phone: 662.252.8828
Text: 662.420.4891
Email: [email protected]

Wrinkle Black Powder Coat Speed Fin Complete HiFlow 828 Air Cleaner Dyna Softail Touring Trike

344.95
Availability: In stock
Item #: DK-828-SF-TC-WB
Manufacturer: DK Custom Products

* Required Fields


344.95

Wrinkle Black DK Custom Harley External Breather System EBS Performance Speed Fin Stage I air cleaner Outlaw 828

Outlaw HiFlow 828

Air Cleaner System

For

Harley-Davidson
Dyna~Softail~Touring~Trike Twin Cam Models

~High Performance Air Cleaner~

~Wrinkle Black Powder Coat Speed Fin Cover~

 ~Fits EFI & Carbureted~


MADE in The USA!

DK Custom Products

 

FEATURES & SPECS:

  • HiFlow Genuine K&N Air Filter
  • 6" x 9" Oval for Maximum Flow 
  • Backplate Billet Machine Cut Finish
  • Lightweight Wrinkle Black Powder Coat Speed Fin Cover (10 7/8" Wide, 7" Tall & 2 1/8" Deep)
  • Choice of Support Brackets
  • Your Choice of External Breather System - EBS (NO oily air in engine)
  • A True Stage I Air Cleaner
  • E-Z Step-by-Instructions Included
  • Super Low Profile of 2" Total
  • Made in The USA!

 

The Outlaw HiFlow 828 System will give your Twin Cam the Air it needs to Produce Maximum Power.  CLEAN AIR - No dirty air routed back in! AND, it is one of the Lowest Profile High Flow Intakes available

This System is TURN-KEY.  It comes with everything you need to replace the restrictive stock air cleaner.

E-Z Installation with Step-by-Step Instructions.

Genuine K&N Filter with Million Mile Warranty.

Filter is re-usable.  Simply wash, let dry, & apply oil.  See Filter Service Care Kit HERE.

Fits Carbureted & EFI Dyna, Softail, & Touring Twin Cam Models.

This is a must for at Stage 1- IV Upgrades.

 You can upgrade to the Outlaw HiFlow 828 Air Cleaner without doing any dyno work or adding tuners IF you leave the stock exhaust in place.

Replace the Restrictive stock air cleaner on your Twin Cam and wake it up!

The 6061 Billet Backplate was designed for maximum flow and minimum impact on rider leg clearance, with only 2" from Throttle Body/Carb to Outside Surface of Cover.

Included: Your Choice of Brass, Black or Polished Aluminum Breathers.  Or you can choose one of the Hose & Filter Breather Systems for venting- The Traditional or the Discrete.  To see full details on ALL these choices Click HERE.

When choosing between the 6 Breather systems, it is helpful to know-

1.  All three Breather Bolt function the same, it is just a matter of which color you prefer.

2.  All of the Hose and Filter or Catch-Can  Breathers function the same with the Outlaw Air Cleaners, it is a matter of which system you like the looks of the best.

The Transformer™ is the Ultimate External Breather System, that Doubles as a Support Bracket and can be Transformed into an EPA (Emissions) Compliant System. It fits all Outlaw Air Cleaners.

The EPA has required Harley to route dirty, oily crankcase air back into the air cleaner compromising the performance of your engine. The Outlaw Breathers vents it without compromising the performance or longevity of your motor.

 

This System comes with a Chrome Speed Fin Cover.  There is plenty of room for air flow around the cover, especially with the cut-out (pictured above) along part of the bottom.

Note: The cover is an imported item, lightweight, with a limited quantity available. There may be very small imperfections in the chrome, not visible from 5 feet away.  Because of the limited quantity, these are Not able to be returned or exchanged.

 

This HiFlow Performance 828 Intake System is also available with a

Chrome Cover .  Click HERE to See it.

  

Fitment:

2000-2015 Softail (cable operated throttle)

2016-Up Softail (Throttle by Wire TBW)

2000-Up Dyna (cable operated throttle)

2000-2007 Touring (cable operated throttle)

2008-Up Touring (Throttle by Wire TBW)

If you have a 2008-Up Touring Model, or a 2016-UP Softail, it has Throttle by Wire (TBW) and you must check the TBW option above to get the correct backplate.

 

 **This Air Cleaner System comes with a Support Bracket.  If you already have an aftermarket support bracket for your cable operated bike,  you may click the box above and save $22.  

If you have a Throttle-By-Wire bike, you have a black Support Bracket already and you may click the box above and save $22.

Look at our Support Brackets HERE.

 

Caution:  Motorcycles modified with this DK Custom Products High-Performance part may not be legal for public highway use in some areas.  The user shall determine suitability of this product for his or her use.

"I really like this 828, great flow and low profile for absolutely no leg interference."   -James

 

 

Check Out the Video Below for Dyno Comparison to Stock!

Be the first to review this product

No Reviews.


Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.