CHROME STREAMLINER BULLET

REAR TURN SIGNALS ~ LOW PROFILE RUNNING LIGHTS/BRAKE LIGHTS

RELOCATION KIT

DK Custom Products

FEATURES & SPECS:

• Chrome Metal Housing
• Low Profile - Short Stem w/ Rubber Dampening Washer
  
• Measures 1 1/8" in Diameter & 2 7/8" front to back 3/8" Mounting Stud
  
• Red Lense for Rear Fitment
  
• Includes 12 volt automotive Dual Filament bulbs
• 8/21 Watts - Running/Brake/Turn Signal Lights
• Includes Relocation Brackets & Wiring blocks
• Comes with installation instructions
  

Perfect Low Profile Lights for Your Bike

• Universal Fit -  Can be bolted on in a variety of locations- Two popular ones are the Fender Struts and the back of the belt tension adjustments on the rear axle.
  

• Includes self-adhesive wiring blocks to hide the wires.
  

• Comes with automotive 12v dual filament bulbs, no messing with resistors or load equalizers.

• This pair of rear turn signals also doubles as running lights or brake lights-Your choice.
  

• Housed in Chromed metal with a short stem, you can get these nice and tucked in.

• These are also available in Sano Black Powder.  Click HERE to see them.

•  Matching Front signals available also.
  

Fitment Note:  On all 14-Up Models, HD is now using a CanBus Body Control Module.  With the CanBus system multiple signals can be sent over the wires at the same time, making the electrical system very sensitive to any changes.  We have had quite a few Customer install our non-LED tail-lights, brake-lights and turn-signals with no issues, however, we cannot guarantee they will work, nor can we support their installation on a CanBus bike.

Our Batteries, Tuners, Coil Relocation, ignition relocation, horns, and headlights can be installed on the CanBus bikes with no issues.

"They are bright, but not sticking out like ears.  Really digging them!" -Finn