- Home /
- Horizontal License Plate Bracket w/ Ford Model A Tail Light
HORIZONTAL LICENSE PLATE BRACKET
w/ FORD MODEL A STYLE TAIL LIGHT
FITS ANY BIKE
MADE IN THE USA!
By
DK Custom Products
FEATURES & SPECS:
- Made from American Cold Rolled Steel
- Mounts to axle or shock bolt (or anywhere else you want)
- Durable Black POWDER COAT Finish
- Includes Your Choice of '28-'32 Model A Style Tail/Brake/Plate Light
- E-Z BOLT-ON INSTALL
- Modular design allows for Left OR Right side mounting
- Step-by-Step Instructions Included
- Your Choice of 1/2" or 1" mount hole
- Lifetime Warranty on bracket
You can change the look of your bike big time with this simple relocation!
- This easy-to-install kit, relocates your license plate to the left OR right side of your bike!
- The Modular design is the strongest on the market, backed by a Lifetime Warranty on bracket.
- The most popular mounting points are the shock bolt or axle, however, you can mount it anywhere you have a bolt or tab to put a bolt through. Pictures below show it mounted to the bottom shock bolt.
- When ordering you will have a choice of a 1/2" bolt hole (for shock bolt mounting) or a 1" hole (for axle mounting).
- The axle mounting arm is 3/16" thick
- The shock mounting arm is super beefy 1/4" thick
- Ford Model A Style Tail Light in a Polished Stainless Steel OR a Sano Black Powder housing, also functions as brake light and license plate light.
- Also available is an optional All Glass Tail Light Lense that illuminates "STOP" when the brake light comes on.
- Fitment notes: If you are using shock lowering blocks, it is probable that you will Not have clearance to use the axle mount, so order the shock mount size (1/2").
- On some Dyna Models the shock bolt may not be long enough to work with this kit. It may be necessary to visit the hardware store for a 1/2" longer bolt.
- Designed for 7" x 4" plates (USA size). Larger plates will fit, and we have many Customers running these in Europe, Asia and South America, however, Lifetime Warranty does not apply.
- The axle mounting arm is 3/16" thick, make sure you have that much room between your axle nut and circlip
This is a HORIZONTAL Mount Bracket
We also have Vertical Mount Brackets available
Also available are brackets with no lights
"Totally Changed the look of my bike from the back! " -Terry
Additional Ground Source
If you are having problems with the light coming on, it could be from a poor ground. The solution is to run an independent ground wire as pictured below.
Product Tags
Use spaces to separate tags. Use single quotes (') for phrases.
- Accessories
- Scratch & Dent Specials
- Air Cleaner - Intake
- Apparel - Gear - Jewelry
- Coil & Key Relocation
- EFI Tuners
- Electrical
- Engine Upgrades
- Exhaust
- Footpegs
- Frame/Suspension
- GIFTS
- Gas Tank Lift Kits
- Lubrication
- Special Packages
- Stage I Kits
- Tour-Pak Kits
- NEW PRODUCTS
- Reports
- BEST SELLERS
- FAQ
- Sportster Parts
- Dyna Parts
- Softail Parts
- Bagger Parts
- Trike Parts
- Home Reviews
- Murdered-Out Mods
- Winter Project Ideas
- M8 Softail Parts
Community Poll