Outlaw Brass Breather Bolts Harley-Davidson TWIN CAM
SOLID BRASS
BREATHER BOLTS
For
Harley-Davidson
TWIN CAM & MILWAUKEE-EIGHT's
MADE in The USA!
DK Custom Products/ Meadows Moto
FEATURES & SPECS:
- Machined From Solid Brass Stock
- Dual Brass Screens with Filter
- Set of Two
- FITS TWIN CAM Motor
- No More Hoses
- Made in The USA!
- Mfg. Exclusively for DK Custom Products by Meadows Moto & Machine
This pair of Brass Breather Bolts will really clean up your ride! No more hoses or filter. The filter is built into the bolt.
The EPA has required Harley to route hot, dirty, oily crankcase air back into the air cleaner compromising the performance of your engine. This vents it without compromising the performance or longevity of your motor.
Caution: Motorcycles modified with this DK Custom Products High-Performance part may not be legal for public highway use in some areas. The user shall determine suitability of this product for his or her use.
With the Outlaw Racing Breather Bolts you will experience a slight performance increase. This is because engines like Cold Dry air!
Also available in Polished Aluminum and Anodized Black. These are a must-have when doing your Stage 1 upgrade.
E-Z Install
Fits All Twin Cam & Milwaukee-Eight Motors (1999-Up)
Fitment Notes:
These are made to work in conjunction with a standard after-market support bracket which is about 1/8" thick. The thread length on the OUTLAW Breather Bolts is 3/4".
"Cleans up the look big time. Very little mist, and only when I'm hammering it." -Stevo
5
Share your thoughts with other customers
Top customer reviews
-
Look and work great 0 people found this helpfulSuper easy install, replaces my catch can setup. Didn’t like the look of the hoses hanging down with the Outlaw intake on. Swapped to these and they look great. No seeping so far.
-
DK External Breather Bolts 1 people found this helpfulThese are real nice if you choose to use an external breather bolt setup on a Twin Cam engine. Attached is a pic of the breather bolt setup on my High Compression 117" Twin Cam along with the DK Custom Intake Manifold Bracket and their Outlaw 828 Air Cleaner
-
Does the job 0 people found this helpfulThis is my forth set for my forth M8 Softail. Chase the head threads before installing. Don't over tighten. Occasionally I get a slight weep but overall these are a great product
-
great product 1 people found this helpfulbetter than expected.nlce bright finish,easy to install.works as advertised.
-
Love these 1 people found this helpfulSuch a clean look... and being brass, "classy as well!
-
Excellent quality, easy install. 4 people found this helpfulMy particular 103 has a lot of oil spray out of these and was all over the engine. I ended up buying DK’s EBS with black can to collect the oil. Awesome setup.
-
2007 HD FLHTC 96" TC. Positive review, would definitely recommend. 2 people found this helpfulVery clean, classy and high polished. Kinda enthused that I won't be burning nasty crankcase/engine oil fumes through my engine anymore. Also matches my other brass accent parts on my bike. .45 cal. shell casing valve stem caps and a brass shifter linkage.
-
Easy and worthwhile 1 people found this helpfulRan across these from a customer of mine. Looked way too simple to really do anything. I was upgrading his motor to a 114 and after breaking down his motor I was amazed at how clean a 5 year old motor with over 15000 miles were on it. After that I bought for my own bike and told several customers about and they purchased. Folks while very simple I can attest that they truly do work.
-
A Must Have!! 2 people found this helpfulUsed a Borescope to look into the combustion chamber area of my 09 Fatboy's 96ci. Was able to get a good look at the top of the piston and there was a considerable amount of carbon present. Engine is stock and had 15,000 miles when I first looked. I replaced the stock a/c with an Arlen Ness Inverted Big Sucker a/c. I installed the DK Breather bolts at the same time. I also started using the SEAFoam additive at the same time at 1oz per gallon. Now at 18,000 miles I again used the Borescope to look at the top of the piston. I would estimate a 75% reduction in carbon on top of the piston. I live in HOT Florida and use 60w Redline oil and have had a very slight oil misting. So slight It is only detected by running my finger across the face of the breather bolts. I highly recommend these breathers. They not only look good, but they have really cleaned up the combustion chamber on both cylinders. This has got to be helpful in performance and helping my engine last longer. Great product! DK is an awesome company!
