Relocation kit for Tour-Pak Harley Baggers 97-08 ...More Details
In stock
SKU
DK-9708-TPR
Views: 0
Manufacturer
DK Custom Products
$109.95
TOUR-PAK RELOCATION KIT
FITS 97-08 HARLEY-DAVIDSON RIGID & DETACHABLE TOUR-PAKS*!
MADE IN THE USA!
By
DK Custom Products
SCROLL DOWN PAGE FOR MORE PICTURES!
FEATURES & SPECS:
- Made from American Polished Stainless Steel
- Stainless Steel Relocation Plate is delivered to you with a protective film which you can remove
- Includes ALL Stainless Steel Hardware
- Moves Tour-Pak back approximately 2.5 inches making things much more comfortable for the passenger!
- Fits both the Rigid Mount and Detachable Mount Tour-Paks on 97-08 HD Touring Models*
- E-Z INSTALL
- Instruction Sheet & Template Included
- Patent Pending
- * Does not fit Tour Paks that have Amplifier attached to bottom
- Optional Tour-Pak Filler Pad*
- Get More Comfortable Miles with those extra few inches...it makes All the Difference in your Passengers Comfort!
- Makes it much easier for the passenger to climb on & off the bike, especially if there is a drivers backrest!
- This works with both the Rigid Mount Tour-Pak and the Detachable Mount Tour-Pak.
- 97-08 mounting racks from the factory have an inherent design flaw resulting in a rack that is prone to breaking. This simple, but effective low profile relocation kit is rated at over 10,000 PSI and greatly enhances the strength and durability of your rack AND Tour-Pak.
- If you have a Road King, Road Glide, Street Glide, or any Model of the Electra-Glides w/ a Tour-Pak....Your Passenger WILL Thank YOU for the Comfort these extra few inches gives them!!!
A template is included with the instructions for holes you may have to drill in the Pak. Over the years The MoCo has had a variety of different hole patterns in the Tour-Pak bottom plate. Some models of the Tour-Pak have as many as 14 holes, some as few as 5 holes. When using the template you may find that you already have some, or all of the needed holes.
*Does not fit Tour Paks that have an amplifier attached to the bottom, such as the CVO's.
IMPORTANT NOTE: If you are looking for a kit with "Bling", or something that is overly complicated, this is NOT the kit for you. This Relocation is amazingly simple in design, and once installed it is not visible.
There are other kits on the market that put the Tour-Pak up higher on the rack, moving the Center of Gravity Higher, they also are quite visible and cost more.
With this kit, there is no chrome, it simply relocates the Tour-Pak back for Passenger Comfort. It gets the job done, and the only person who will know it is there is your passenger.
Fitment Note: You may want to fill the gap between the Tour-Pak and the back of the seat. You can see a Comfortable Tour-Pak Filler Pad at this Link
*The Tour-Pak Filler Pad is Specifically Designed for '97- Up Touring and Trike Models to fill the open area between the rear of the passenger seat and the Tour-Pak when using The Tour-Pak Relocation Kit. Depending on the location of the Tour-Pak, it may sit flat or be angled up when no one is sitting on it, but when sitting on the cushion it feels perfectly smooth.
This is an EASY install - 30-45 minutes!
If Mama's happy, everybody's happy!
"Got it fast...installed it...what a difference it makes!!!" -Brian
4.6
Write a review
Share your thoughts with other customers
Top customer reviews
-
It was well worth it 0 people found this helpfulProduct is good and wife likes it. Filler pad was not needed on my style seat with sheep skin cover on it.
-
Easy install 1 people found this helpfulMy customer said this was an easy install, just had to drill two holes for his application. He also was happy with the price.
-
Not worth the money. There should be better options out there. 0 people found this helpfulWas not impressed with this product at all. I looked and never saw an actual picture of the product. It is nothing more than a flat square piece of steel with holes drilled in it. On top of that the instructions state you need to drill more holes in it and your tour pack.Not worth the price they are asking in my opinion.
Response from store
I'm sorry to hear the product didn't meet your expectations. We understand that value can be subjective, and we regret that you didn’t feel it was worth the cost.
While the bracket is a simple design, it does allow you to move your Tour Pak back up to 3 inches, which can make a significant difference in comfort, especially for riders or passengers needing more space. That said, your satisfaction is important to us, and we do accept returns if you're not happy with the product.
If you'd like help with the return process or have any questions about installation, feel free to reach out. We're always here to help.
[email protected]
Best regards,
Melissa Bright -
2006 Ultra Classic 1 people found this helpfulUsed on a 2006 ultra classic. Fairly easy installation. I wish I could’ve set it back an additional one inch to get more room.
-
Worked great! 1 people found this helpfulEasy to install. Great price! Works like a charm!
-
It works 3 people found this helpfulThis plate does what it was intended to do, but be prepared to make a couple of spacers to go between this plate and the two holes you have to drill in to the bottom of your tour pack. Fortunately, this isn’t rocket science because it did not come with the template and all of the hardware needed to mount it.
Response from store
Thank you for your business. We are very sorry you did not receive the template. Please contact us (info below) and we will get you whatever hardware you are missing.
Our apologies for it not all being there. We work very hard to make sure everything goes out correctly, it is very disappointing that we did not package your kit correctly.
We will make it right for you.
[email protected]
662-252-8828
I do apologize for any inconvenience this caused you!
Thank you for taking the time to leave a review! -
TourPak Relocation Kit 1 people found this helpfulI haven't been able to install the Relocation kit yet as I am recovering from Knee Replacement surgery but it arrived right on time and looks to be just what I am looking for and at over half the price of other kits I have found. Ride safe Ya'll
-
A little extra room goes a long way! 2 people found this helpfulI took my time and read through the instructions before we started. Had some help and glad i did. My CVO already had most of the holes drilled so that was a plus. Wifey loves the extra space, especially after lunch!!! A+ product
-
Great relocator kit 0 people found this helpfulIn the beginning I had to read a few times the instruction sheet. But after checking it out, I got the right measurements and it worked great.
-
It works as expected. 2 people found this helpfulAfter installing a couple relocator kits on later model bikes this one is different. I put it on an 03 Roadking. This kit is trying to cover way more mounting scenarios than the later model kits. So therefore it maybe not as plug and play as other kits for other models. Still was easy to install. It gave me the room i was looking for. After having thought about how I would relocate it myself then finding this kit it saved me the hassle of rounding up the parts myself. The piece of plate should give a certain amount of support to the Tour pak which I like as now days I tend to overload it. Customer service was very good.
-
Works perfect 0 people found this helpfulGives the wife more room for comfort A+ 2005 Ultra Classic
-
Great addition 1 people found this helpful2006 Road King, more room for girl friend. Follow Instructions easy to install. Read twice drill one. DK customs great Products.
-
Mama's very happy 0 people found this helpfulNo frills, easy peasy! Just what I was looking for. More room for my wife. She always felt that she was crowding me. Made a big difference.
-
Easy to follow instructions quick install 0 people found this helpfulIf you will sit down and read your instructions before you walk out to start it helps alot. But honestly I think it took less than an hour even reading as I went. Had my wife step out to help for a few just to make sure i didn't drop or scratch anything. The room we gained was exactly what we needed.
-
Don't over think it. 0 people found this helpfulpeace of mind, drill your new holes slowly ( have someone else steady the pack ) and slide the new mount into place . I Didn't want to remove the wiring and put up with that hassle, turned out great.
-
Don't over think it. 0 people found this helpfulFound this on Ebay and went to their website, it was a little cheaper to order it directly from them. Cheapest one that I could find that sounded like it would work ,I placed my order and was checking out the website later in the day to find out that they have a scratch and dent area, if I read it right there was one in there and I could have saved a little more. It is all but about 2 inches completely hidden under the tour pack . Like I said ( don't over think it ) I didn't even take the tour pack off the bike. Loosen the 4 main bolts lay the template down and put the bolts through the template and tighten only a couple turns (just for pese
-
100% As Advertised 0 people found this helpfulI ride a 2000 FLHT and searched for a color matching Tour Pack. Finally found one and after installing it, knew immediately it was to tight and needed to somehow be moved back several inches. After searching for a relocation kit, this product from DK Customs seemed to be what I was looking for. I ordered it from my phone, it was delivered within the advertised time and came complete with everything needed to install it! Instructions were spot on, don’t overthink the information, the template they provided I cut out the pre-marked holes and taped it down on the inside bottom of the Tour Pack. I had to drill 2 holes, the kit came with all the bolts, nuts, washers, and lock washers. Was exactly what I needed and recommend purchasing this kit if you need to move your Tour Pack away from your stock seat.
-
Great product 0 people found this helpfulWe've got an 05 road king that we put 70,000 miles on ..after installing your kit I couldn't believe the improvement in comfort . the wife used to push on my back on long rides and I would end up on the tip of the seat ,after installing the kit we had all the room we needed wish we would have done it earlier. Install was fairly easy be sure to pay close attention to the installation instructions measure twice drill once. Overall excellent
-
Had issues, but company found solution! 1 people found this helpfulI ordered this extender for my 1997 electraglide Classic, it showed up on time and the price is good for the time it would save you to buy a pieces of metal and figure out where to drill the holes, comes with all necessary hardware and instructions. That’s where I ran into troubles! Lol my 1997 stick Harley came from the factory with a different mounting bracket that the ultras used, mine is secured with just three holes and the Dk plate is meant for the five hole Harley bracket. I called and spoke with dk personnel, can’t remember their names but the man said he never seen that bracket on a stock bike, after investigating we did indeed figure out it is a stock bracket , because the bike was special ordered that year, that might have been the reason. Anyways, we got it figured out, I used the original mounting holes and original bolts which bolt right into bracket and don’t go all the way through ultra bracket, I had to drill only three holes and get another bolt to match the original. Overall, the product works and looks good, abit of a pain in the ass figuring it out but no fault of DK customs, great customer service in helping me figure out another of Harley Davidsons oddities.
Write Your Own Review