DK Custom Products

Phone: 662.252.8828
Text: 662.420.4891
Email: [email protected]

Complete HiFlow 828 Air Cleaner System - Harley Sportster w/ Wrinkle Black Speed Fin Cover

344.95
Availability: In stock
Item #: DK-AC-828-SF-S-WB
Manufacturer: DK Custom Products

* Required Fields


344.95

Wrinkle Black DK Custom Harley External Breather System EBS Performance Speed Fin Stage I air cleaner Outlaw 828

Outlaw HiFlow 828

Air Cleaner System

For

Harley-Davidson 
Sportster Models 1991-UP

~Complete High Performance System~

 ~Fits EFI & Carbureted~


MADE in The USA!

DK Custom Products

 

FEATURES & SPECS:

  • HiFlow Genuine K&N Air Filter
  • 6" x 9" Oval for Maximum Flow
  • Backplate Billet Machine Cut Finish
  • Wrinkle Black Powder Coat Speed Fin Cover (10 7/8" Wide, 7" Tall & 2 1/8" Deep)
  • External Breather System - EBS (NO dirty air in motor)
  • A True Stage I - IV Air Cleaner System
  • E-Z Step-by-Instructions Included
  • Super Low Profile of 2" Total
  • Made in The USA!

 

This Outlaw HiFlow 828 System will give your Sportster the Air it needs to Produce Maximum Power.  CLEAN AIR - No dirty air routed back in! AND, it is one of the Lowest Profile High Flow Intakes available.

This system is TURN-KEY.  It comes with everything needed to replace the restrictive stock air cleaner.

E-Z Installation with Step-by-Step Instructions.

Genuine K&N Filter with Million Mile Warranty.

Filter is re-usable.  Simply wash, let dry, & apply oil.

Fits Carbureted & EFI Sportsters 1991-Up.

This is a must for at Stage 1 - IV Upgrades.

 

Included: Your Choice of Brass, Black or Polished Aluminum Breathers.  Or you can choose one of the Hose & Filter or Catch-Can External Breather Systems for venting - To see full details on All these choices Click HERE

The 6061 Billet Backplate was designed for maximum flow and minimum impact on rider leg clearance, with only 2" from Throttle Body/Carb to Outside Surface of Cover.

When choosing between the  Breather systems, it is helpful to know-

 1.  All the Breather Bolt function the same, it is just a matter of which color you prefer.

 2.  All  the Hose and Filter - Catch-Can EB Systems function the same with the Outlaw Air Cleaners, it is a matter of which system you like the looks of the best. 

 The Transformer™ is the Ultimate External Breather System, that Doubles as a Support Bracket and can be Transformed into an EPA (Emissions) Compliant System. It fits all Outlaw Air Cleaners.

This System comes with a Wrinkle Black Powder Coat Speed Fin Cover.  There is plenty of room for air flow around the cover, especially with the cut-out (pictured above) along part of the bottom.

Note: The cover is an imported item, lightweight, with a limited quantity available. There may be very small imperfections in the powder coat, not visible from 5 feet away.  Because of the limited quantity, these are Not able to be returned or exchanged.

 

These are also available with a Chrome Cover, which you can see HERE, a MCF Cover, which you can see HERE, and No Cover, so you can use your factory Ham-Can Cover (or no cover at all, or a cover you design).  See the No Cover 828 HERE.

See the full spec's on the K&N Filter Element HERE.

You can upgrade to the Outlaw HiFlow 828 Air Cleaner System without doing any dyno work, or adding tuners, IF you leave the stock exhaust in place.

The EPA has required Harley to route dirty, oily crankcase air back into the air cleaner compromising the performance of your engine. The External Breather System vents it without compromising the performance or longevity of your motor.

Caution:  Motorcycles modified with this DK Custom Products High-Performance part may not be legal for public highway use in some areas.  The user shall determine suitability of this product for his or her use.

 

"This is exactly what I was looking for!  Retro to the max.  Thank you!."  -Fred

Check Out the Video Below for Dyno Comparison to Stock!

Be the first to review this product

No Reviews.


Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.