XL 4 Stage Machine Cut Billet Catch Can for External Breather System EBS Harley

XL 4 STAGE

VENTED ALUMINUM CATCH CAN

Perfect for DK Custom Products 

Discrete & Premium Discrete

External Breather Systems

FOR

Harley Davidson Motorcycles

Made in The USA!

FEATURES & SPECS:

• CNC-Machined Aluminum
• Vented Cap
• 4 Stage Internal Filtration System
• 1 Extra O-Ring
• 2" Diameter, 3.25" Tall
• Hose barb for 3/8" ID hose (same as hose barbs on EBS)
• Also available-Black Finish HERE
• Made in the USA!
• Optional P-Clamp for more Secure Intallation*
   

The XL Catch Can Is 33% Larger holding 3 ounces of liquid, where the Standard Catch Can holds 1 ounce of liquid.

Hundreds of hours of research and thousands of miles of riding have resulted in this 4 Stage Catch-Can that allows air to pass through but keeps the oil and water in the Catch-Can on typical Harley's.  

See the photo's of the 8 different components that make up the 4 Stage System.  Even with the worst spitters most of the water and oil stays in the Catch-Can!

Designed for the hot, oily, watery, oxygen-depleted air to pass thru the tube, exiting near the bottom.

Most of the oil and water will drop into the low density foam.  The air, and some atomized water and oil hits the first separator, stopping some of the liquid, but allowing the air to continue on through the high density foam.  There are two more separators and two more pieces of high density foam that work at stopping the liquid, but let the air exit the vent holes in the cover.

Periodic emptying of the Catch-Can is easy.  Simply unscrew the can from the lid and dump it.

Cleaning of the foam and separators is not necessary, but easy to do if one wishes.

There is an extra O-Ring included, should the installed O-Ring get lost or damaged.

There is also a refresh kit with extra O-Rings and filtration system that is an option or can be purchased separately.

Sometimes the kits have two thinner pieces of low density foam (as pictured above) other times it is a single thicker piece of low density foam.  Both versions function equally well.

See that kit HERE.

* Optional P Clamp for a more Secure Installation. You can see more about the P Clamps at this LINK. 

The EPA has required Harley to route hot, dirty, oily, oxygen depleted crankcase air back into the air cleaner compromising the performance & longevity of your engine. When using an External Breather System, your bike will run better and last longer.

This Catch Can is a nice option that will work with your Discrete or Premium Discrete Breather System.

Also available in Powder Coat Black Finish, see at this LINK

To See the Standard Catch Can click the Color You want to see Standard Black or Standard Machine Finish.