STEALTH LED
Amber Front Turn Signals/Running Lights
Multiple Fitment
DK Custom Products
FEATURES & SPECS:
- Multiple Fitment
- Three Choices - 39mm, 41mm or 49mm
- LED Strip is 5/16" w/ smoked tubing
- Stealth fitment around Fork Tubes
- Amber Running Lights
- Bright Amber Turn Signals
- No Load Equalizer needed
- Pre-Formed "Snap-on" design w/ 300 degree visibility
- Easiest to install fork wrap LED's available
- No cutting, splicing or soldering of wires
- Comes w/ step-by-step instructions
- ALL Amber, compliant world-wide
DK Custom Introduces the Easy-to-Install
"Snap-on" All Amber LED Front Turn Signals/Running Lights
SEE & BE SEEN!
Wrap-around Design for 300 degree Visibility
- DK's Stealth All Amber LED Front Turn Signal & Running Lights are pre-formed around a "Snap-on" ABS mounting bracket. This make installation a breeze. There is no cutting, splicing, or soldering of wires.
- The "Snap-on" bracket not only makes for an easy installation, IT ALSO makes it easy to remove and re-install if you need to work on your forks.
- Choice of 3 sizes. 39mm (fits most Sportsters) 41mm (fits some Dynas, someSportsters & Softails) 49mm (fits some Dynas)
- If you have a 2014 or later, you do NOT need a load equalizer.
- If you have a 2013 or earlier, & are running the stock rear turn signals, you do Not need a load equalizer.
- If you have a 2013 or earlier, & you're running LED rear turn signals, but keep the stock front turn signals, you do NOT need a load equalizer.
- The Only time you need a load equalizer is if you have a 2013 or earlier, And have LED turn signals up front and in back, and do not keep any of the stock turn signals, then you will need a load equalizer, which you can see HERE.
- If you wish to keep your stock front turn signals, in addition to the Stealth LED FTS's, you can do that. Just leave them hooked up.
The Stealth LED's work with the 4-way Hazard Lights and alarms, just like the stock lights do.
FITMENT:
These all AMBER LED's make them legal in Countries where the running lights must be Amber.
If you prefer to have Amber Turn/White Running lights, see them HERE.
All Motorcycles that have a 12 volt system, 39mm, 41mm or 49mm forks, and turn signals, including Sportster, Dyna, Softail, Harley-Davidsons.
*These are designed to Snap-on/Mount to the Fork tubes. They will not work with Fork Slider Covers found on Touring Models and some Softails.
For Touring Model Fitment, and some Softail Fitment, see HERE
"The installation went really fast. Instructions were easy to follow. The lights really make a difference, Much better than the stock signals." -Brad
