DK Custom Products

Phone: 662.252.8828
Text: 662.420.4891
Email: Support@DKCustomProducts.com

Sportster Model Tank Lift Kit

42.95
Availability: In stock
Item #: DK-SPT-TLK
Manufacturer: DK Custom Products

* Required Fields


42.95

DK Custom PREMIUM TANK LIFT KIT FITS SPORTSTERS 1995-UP  NIGHTSTERS~IRONS~48'S~72's~SuperLow~Low~Custom

NEW PREMIUM TANK LIFT KIT
FITS SPORTSTERS 1995-UP

 NIGHTSTERS~IRONS~48'S~72's~SuperLow~Low~Custom

MADE IN THE USA!
By
DK Custom Products

 

FEATURES & SPECS:

  • Made from American Cold Rolled Steel
  • All Stainless Steel Hardware
  • Durable Black Powder Coat Finish
  • E-Z BOLT-ON INSTALL - DOES NOT REQUIRE REMOVAL OF TANK
  • Instruction Sheet Included

 

This is the TOP OF THE LINE Premium Tank Lift Kit. Our product line includes: 1.5", 2", 2.5" &  3" rise kits...they are different (purpose-made & patented)...no extra metal or holes for multiple fitments, the lines match the lines of the bike. American Made. 

Look at all the pictures...you will be very pleased with how this alters the attitude of your ride!

Give your Bike a Radical New Look! 

Cleans up the Lines of the Bike, Gives it a Stretched Chopper Look. 

Provides Better Air-Flow - Engine Runs Cooler 

Gives you room to tuck the wires under the tank if you wish.

  
This is an EASY install - 10 to 20 minutes! 

Fits 1995-UP Sportster ~ Nightster ~ Iron ~ 48 ~ 72 ~ SuperLow ~ Low ~ Custom 

 The DELUXE Option is ESPECIALLY useful for some pre-2004 Sportsters because the Factory rear tank design does not allow the front to be lifted more than 1.5" without this Option.

Generally 2004+ Sportsters do NOT benefit from this Option unless it is imperative to move the tank back for clearance issues.

Full details on the Deluxe Option HERE.

IMPORTANT FITMENT NOTES:

If your tank has rubber grommets in the front tank ears (this is probable on 1995-2003 models), please make sure to let us know by checking the box below so we can send the special tank lift brackets for your bike.

Please make sure this mod does not interfere with any components on your bike - like  handlebars, turn signals, custom trees, etc.  You don't want to end up with a dented tank!  Check for clearance before ordering.
We are NOT responsible for any damage done to your bike because of the kit.

It is easy to check for clearance:


1. With bike on kickstand, take the bolt out of the front of your tank.

2. Loosen (do not remove) the bolt at the rear of your tank. 

3. Turn your handlebars all the way to the left and raise the tank up your desired lift height to check for clearance issues.

4. Turn your handlebars all the way to the right and raise the tank up your desired lift height to check for clearance issues.

Be careful when lifting your tank, you do not want to hit it against something (forks, handlebars, trees, blinkers, etc.) when checking for clearance.

"Great product, this is how it should come from the factory." -Jimmy

U.S. Patent D650,316 S

Click on the link below for an article on everything you need to know about Lifting your Tank.

-Will if fit?

-Will I lose fuel capacity?

-What is the purpose of a Tank Lift?

-Does it reduce Wind Buffeting?

What is a Tank Lift and why do I need one?

Customer Reviews

Quality
Value
Hated it. Love it now. Review by Otto
I honestly hated the look and idea of lifting my tank since it looked strange in pictures and I read about losing some fuel capacity. Why on earth would anyone do this? I thought people were straight up nuts. But then as I sat outside a Krispy Kreme here in sunny Southern California… I saw something. Not a new HD Softail, not a hot chick and no not even a beautiful sunset. I saw another fellow Iron 883 rider park up next to me with a lifted tank and wires tucked. I was spellbound. It looked KILLER! Seriously! It looked as killer as the juice-man talking about gloves not fitting so they must be acquitting!

I had to do it! So I did. Did I lose a little fuel capacity? Sure. Not a big deal since I ride about 75 miles round trip daily for work and fill up at the end of the day, every day anyway. Mad style points! Buy this yesterday! Lift those tanks!
(Posted on 12/9/2017)
Quality
Value
I didn’t know I’d be into this...but I am! YOLO? Review by Otto
I honestly hated the look and idea of lifting my tank since it looked strange in pictures and I read about losing some fuel capacity. Why on earth would anyone do this? I thought people were straight up nuts. But then as I sat outside a Krispy Kreme here in sunny Southern California… I saw something. Not a new HD Softail, not a hot chick and no not even a beautiful sunset. I saw another fellow Iron 883 rider park up next to me with a lifted tank and wires tucked. I was spellbound. It looked KILLER! Seriously! It looked as killer as the juice-man talking about gloves not fitting so they must be acquitting!

Background: I went with the 1.5 lift on a 2017 Iron 883. (Posted on 12/9/2017)
Quality
Value
Tank lift , ignition and coil relocation Review by Gagnon performance
Real great quality and perfect fit i will recommend to everybody! Fits perfect on my forty eight 2014 ! Tanx dk custom for the support (Posted on 12/6/2017)
Quality
Value
A little expensive, but good quality. Review by John
My only gripe about this is I feel it's a little expensive for what you're really getting. That being said, I didn't have to do anything in creating this and didn't need 100 trips back and forth between auto and hardware stores. All in one kits can be overpriced, but that's okay. This took a little bit of time to install having to remove the tank entirely, but nothing too bad. The real bulk of the time comes when you have to cut/rip that ugly black plastic that H-D installs to hide all the wires on the Sportsters. After that you need to figure out ways to relocate, tuck, and hide all the wires. I went to an auto parts store and bought some black plastic flex tubing, zip ties, and electrical tape. I tucked whatever I could in the tubing, wrapped everything in electrical tape, and then zip tied everything to the frame. A lot of it is trial and error and making sure everything looks like you want it. Other than that, this product is SUPER simple to install once all the logistics of wire-hiding is done. Gives the bike a nice clean customized look and I have to imagine allows more cool air to pass over the engine. Win win! (Posted on 10/1/2017)


Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.