ONE PAIR of 3 inch "Fat"
ALUMINUM RISER EXTENSIONS
For
Harley-Davidson
Increase the Height of your Handlebars by 3 inches
~ Increase Comfort ~ Improved Look ~
MADE in The USA!
by
DK Custom Products
FEATURES & SPECS:
- CNC Machine Cut Finish
- Easily Polished to a Mirror Finish
- Billet Aluminum
- Risers are 3" Tall and 1.5" in diameter (other lengths available-see below)
- Includes Grade 8 Bolts 5.5" x 1/2"
- FITS most Fat handlebar risers on Harley-Davidson's
- Made in The USA!
Raising your bars and tilting them back slightly can relieve the strain in your shoulders and back from the forward leaning position.
Whether you're wanting a taller look, needing more clearance, or wanting more comfort in the shoulders and back, these Aluminum Riser Extensions are Easy & Economical!
These ALUMINUM RISER EXTENSIONS will raise your handlebars up an additional 3 Inches.
They are 1.5 inches in diameter, they will fit "fat" risers found on many Softails and Dynas.
Simply measure the outside diameter of the riser below your handlebar clamp, if it is 1.25" - 1.5", these will fit.
The Fat Stealth Riser Extensions are also available in 1" and 2" heights.
NOTE: These have a raw, CNC finish, as seen in the photos. Also shown in the photos are how you can get a mirror finish with 5-10 minutes of polishing.
FITMENT NOTES:
The 3" Stealth Riser Extensions come with 5.5" long Grade 8 Bolts.
Most stock bikes can be raised at least 1.5" without needing to replace cables, brake lines & wiring...HOWEVER some can go higher. Check how much slack you have.
A small change can make a BIG Difference!!!
